Dell: How to Replace the SSD in Dell Pro 24 AIO QC24251

Name: Dell: How to Replace the SSD in Dell Pro 24 AIO QC24251
Uploaded: 2026-07-30T20:07:49-04:00
Duration: 1 min 29 s
Description: Dell Pro 24 All-in-One (AIO) QC24251 | How to replace the 2280 solid state drive (SSD) IMPORTANT NOTE Always back up your data of your disk ( on cloud or external storage ) and consult your manual before trying to remove or to install any component on ...

Dell Technologies

07/30/2026

0 (0%)

Report Like Favorite

TL;DR

The video provides a step-by-step SSD replacement guide for the Dell Pro 24 AIO QC24251, covering both removal and reinstallation of the 2280 M.2 drive.
Disassembly requires removing the stand, back cover, System Board Shield (six screws), wireless module, and I/O Cover before accessing the SSD.
Reinstallation follows the reverse sequence; all components must be properly reseated and screws tightened to secure the system.

Summary

This official Dell Technologies tutorial demonstrates the complete process for removing and reinstalling a 2280 M.2 solid state drive in the Dell Pro 24 All-in-One desktop (model QC24251). The video walks through each disassembly step in sequence: detaching the stand, removing the back cover, extracting the System Board Shield (secured by six screws), disconnecting and removing the wireless module, lifting out the I/O Cover, and finally unseating the SSD itself. Reinstallation follows the exact reverse order, with clear guidance on reseating each component and tightening all screws. Before beginning, viewers are reminded to back up their data, power down and unplug the system, and use proper electrostatic discharge (ESD) protection. The owner's manual at dell.com/support is referenced for safety guidelines and a full list of recommended tools. This tutorial is suitable for users performing a DIY storage upgrade or drive replacement on the QC24251 AIO platform.

Chapters

0:00 - Safety & Prerequisites
0:22 - SSD Removal Steps
0:54 - SSD Reinstallation
1:21 - Support Resources

Key Quotes

0:00 "Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety."
0:17 "Before you begin, turn off the computer and disconnect all the attached peripherals."
0:54 "To reinstall the solid state drive 2280, place it back in the system and secure it with the screw."

FAQ

What components need to be removed before accessing the SSD in the Dell Pro 24 AIO QC24251?

You must remove the stand, back cover, System Board Shield (six screws), wireless module (one screw plus cable disconnection), and I/O Cover (two screws) before the SSD becomes accessible.

What safety precautions should I take before replacing the SSD?

Back up all data to cloud or external storage, shut down and unplug the computer, disconnect all peripherals, and use proper electrostatic discharge (ESD) protection. Consult the owner's manual at dell.com/support for the full safety guidelines.

Categories:

» Data Protection » Backup & Recovery
» Data Protection

Tags:

Show more Show less

TL;DR

Summary

Chapters

Key Quotes

FAQ

Securing the Microsoft Enterprise: Strengthening Configuration Management, Identity Security, and Data Protection

Zendesk: From AI Readiness to Results: A Framework for Transforming IT Service

Leaving VMware Means Leaving vSAN: Your VMware Exit Is Really a Storage Decision

Aligning Agentic Intent: Understanding Your Agents' True Potential and Performance

Reclaim Your Evenings: Leverage Data Intelligence to Minimize Risk and Boost AI Adoption

Agentic Shopping and Muse: Insights for the 2026 Holiday Season

Zendesk Deep Dive: Get the work done faster with Employee Service AI Agents

HUMAN Dialogue: Embracing the Rise of the Empowered AI Consumer.