Replace the 2280 SSD in Dell Pro Micro Plus QBM1250

Name: Replace the 2280 SSD in Dell Pro Micro Plus QBM1250
Uploaded: 2026-09-23T20:28:02-04:00
Duration: 1 min 7 s
Description: Dell Pro Micro Plus QBM1250 | How to replace the 2280 solid state drive in a dual SSD configuration IMPORTANT NOTE Always back up your data of your disk ( on cloud or external storage ) and consult your manual before trying to remove or to install any ...

Dell Technologies

09/23/2026

0 (0%)

Report Like Favorite

TL;DR

Power down the Dell Pro Micro Plus QBM1250 and disconnect all peripherals before beginning any SSD removal or installation procedure.
Remove the side cover by loosening its screw, then loosen the SSD retaining screw, lift the drive out, and unlatch it from the drive assembly.
Reinstall by reattaching the drive to the assembly, securing it with the retaining screw, and replacing the side cover before reconnecting the power adapter.

Summary

This short official tutorial from Dell Technologies walks through the complete process of removing and reinstalling an M.2 2280 solid state drive in the Dell Pro Micro Plus QBM1250 desktop in a dual SSD configuration. The video begins with a safety reminder to consult the owner's manual at dell.com/support and to power down the system and disconnect all peripherals before beginning any disassembly. The removal procedure covers loosening the side cover screw, lifting the cover off, identifying the target SSD, loosening its retaining screw, lifting the drive out, flipping it over, and unlatching it from the drive assembly. Reinstallation follows the reverse sequence: reattaching the drive to the assembly, placing it back in the slot, tightening the screw, and replacing the side cover. A critical note is included at the end — the system will only power on and exit service mode when the power adapter is connected. Viewers needing compatible replacement or upgrade parts are directed to Dell's online Parts Selector tool, and those with questions about customer-replaceable unit eligibility are encouraged to contact Dell Technical Support directly.

Chapters

0:00 - Safety Guidelines & Prerequisites
0:22 - Removing the 2280 SSD
0:38 - Reinstalling the 2280 SSD
0:53 - Post-Reassembly Notes

Key Quotes

0:00 "Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety."
0:36 "Unlatch the drive from the assembly to remove it."
0:53 "Please note, the system will only power on and exit service mode if the adapter is connected."

FAQ

Do I need any special tools to replace the 2280 SSD in the Dell Pro Micro Plus QBM1250?

The video does not specify a particular tool, but the procedure involves loosening screws on the side cover and the SSD retaining bracket. Dell recommends consulting the owner's manual at dell.com/support for the full list of recommended tools before beginning disassembly.

Why won't my QBM1250 power on after I reinstall the SSD?

The video specifically notes that the system will only power on and exit service mode if the power adapter is connected. Ensure the adapter is plugged in before attempting to boot after reassembly.

Categories:

» Cybersecurity » Endpoint Security
» Data Protection

Tags:

Show more Show less

TL;DR

Summary

Chapters

Key Quotes

FAQ

Embracing AI Adoption While Ensuring Robust Security Measures

Risk in Real Time Demo Series: Virtual Patching: Protection at the Speed of Exploitation

Harnessing Data Governance for AI with Cyera and Snowflake